IP67 waterproof UL 0-10V dimmable constant voltage led driver 12V 60w led lighting power supply
Basic Info
Model No.: SMT-012-060VD
Product Description
IP67 waterproof UL 0-10V Dimmable Constant Voltage LED Driver 12V 60w led lighting Power Supply
·Output constant voltage type
·Input voltage Range 100-130VAC/170-265VAC
·Built-in PFC function, PF>0.9
·Efficiency> 88%
·Protections:short circuit/over current/over voltage/over temperature
·Cooling by free air convection
·IP67 design for indoor or outdoor installation .
·Dimming function:0-10V/ 1-10V/ 10V PWM or potentiometer.
·Suitable for LED lighting and moving sign applications
·Compliance to worldwide safety regulations for lighting
·Suitable for dry/damp/wet locations
·3 years warranty
Model | SMT-012-060VD | SMT-024-060VD | ||
Output
| DC Voltage | 12V | ||
Voltage Accuracy | ±0. 5V | |||
Rated current | 0~5.0A | 0~2.5A | ||
Rated power | 60W | |||
Input
| Voltage Range | AC100~130V / AC170~265V / 100-265VAC | ||
Frequency Range | 47~63HZ | |||
Power Factor ( Typ.) | PF≥0.92/110V; PF≥0.93/220V | |||
Full Load Efficiency(Typ.) | >87% | >88% | ||
AC Current(Typ.) | 0.451A | 0.425A | ||
Leakage current | < 0.66mA/110VAC ; < 0.7mA/220VAC | |||
Protection
| Short Circuit | Protection type: Hiccup mode, recovers automatically after fault condition is removed | ||
Over voltage | ≤ 280VAC | |||
Over temperature | 100℃±10℃ shut down o/p voltage, re-power on to recover | |||
Environment
| Working TEMP. | -40~+60℃ | ||
Working Humidity | 20~95%RH,non-condensing | |||
Storage TEM.,Humidity | -40~+80℃,10~95%RH | |||
TEMP.coefficient | ±0.03%/℃(0~50℃) | |||
Vibration | 10~500Hz,5G 12min./1 cycle,period for 72min.each along X,Y,Z axes | |||
Safety&EMC
| Safety standards | EN61347-1 EN61347-2-13. | ||
Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC | |||
Isolation resistance | I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH | |||
EMC EMISSION | Compliance toEN55015,EN61000-3-2 (≥50%load) | |||
EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11,EN61547,A light industry level | |||
Others
| Weight | 1.1Kg | ||
Size | 200*68.5*45mm(L*W*H) | |||
packing | 329*279*176mm/10pcs /CTN 245*80*58mm for inner box | |||
Notes | 1. All parameters NOT specially mentioned are measured at 110V/220VAC input , rated load and 25℃ of ambient temperature.
2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor.
3. Tolerance:includes set us tolerance,line regulation and load regulation . |
Mechanical Specification
- Input Rubber H03VV-F 3G *0.75m2,the green/yellow cable connect with (FG),Brown with AC (L),Blue with AC(N)
- Signal Rubber H03VV-F 2G*0.75m2,Blue is(DIM+),White is(DIM-)
- Output Rubber H03VV-F 2G*0.7m2,Red is output(V+),Black is output(V-)
Dimming Operation
- Built-in 3 in 1 dimming function, IP66 rated .Output constant current level can be adjusted through output cable by connection a resistance or 0/1-10V DC or 10V PWM signal between DIM+ and DIM-
- Reference resistance value for output current adjustment (Typical)
Resistance value | Signle driver | 0Ω | 10KΩ | 20KΩ | 30KΩ | 40KΩ | 50KΩ | 60KΩ | 70KΩ | 80KΩ | 90KΩ | 100KΩ | OPEN |
Multiple drivers | 0Ω/N | 10KΩ/N | 20KΩ/N | 30KΩ/N | 40KΩ /N | 50KΩ /N | 60KΩ /N | 70KΩ /N | 80KΩ /N | 90KΩ /N | 100KΩ /N | —— | |
Percentage of rated current | 0% | 10% | 20% | 30% | 40% | 50% | 60% | 70% | 80% | 90% | 100% | 102% -108% |
1-10/0-10V dimmable function for output current adjustment(Typical)
Dimming value | 0V | 1V | 2V | 3V | 4V | 5V | 6V | 7V | 8V | 9V | 10V | OPEN |
Percentage of rated current | 0% | 10% | 20% | 30% | 40% | 50% | 60% | 70% | 80% | 90% | 100% | 102%-108% |
10V PWM signal for output current adjustment (Typical): Frequency range:100Hz-3KHZ
Duty value | 0% | 10% | 20% | 30% | 40% | 50% | 60% | 70% | 80% | 90% | 100% | OPEN |
Percentage of rated current | 0% | 10% | 20% | 30% | 40% | 50% | 60% | 70% | 80% | 90% | 100% | 102%-108% |
0/1-10V / Potentiometer / 10V PWM (3 in 1) Dimmable LED Driver connecting solution:
applications:
Our products are widely used in various industries, such as
- indoor/outdoor LED illuminating lights,
- LED Neon,
- LED urban Decoration
- LED Lighting Advertising,
- LED Display,
- Safety Protection Apparatus,
- Telecommunications,
- Networks,
- Vehicle Lights, Controller Panels, etc.
Image :
Smarts Electronics have developed some new items of 110~277VAC & output 12V /24VDC dimmable LED drivers with high PFC> 0.98 , high efficiency> 97%, they are:
- triac Dimmable LED Drivers: 12VDC & 24VDC 100W, 150W, 200W, 250W, 300W with junction boxes attached .. 5 years warranty
- 0-10V dimmable LED Drivers: 12V & 24V 100W , 24V 120W , 12V & 24V 150W, 12V & 24V 180W , 24V 200W 3 years warranty
- DALI dimmable LED drivers: 12V & 24V 100W , 24V 120W , 12V & 24V 150W, 12V & 24V 180W , 24V 200W 3 years warranty
what is the packing situation ??
MOQ: 1 PCS
Payment : T/T Western union Paypal Credit Card
Delivery : 7 working days for sample order , 13 working days for 500pcs
Shipping term : FedEx DHL UPS TNT
our market
Our major markets are in EU & North America,it takes about 85% markets share. view transaction history
Why choose Quanzhou Smarts Electronic & Technology Co.,Ltd??
1). Our major markets are in EU & North America,it takes about 85% markets share,that to say we do high quanlity power suppliers only.
2). Most of our products are approved with UL/CE/Rohs approval, our ULfile#E365202. ETLfile # 5005044
3). We give 3 years warranty
4). We accept trial orders begining..
5). We have an area of 2000 square meters factory, about 300-500 production staff...
Website:
our team:
certifications:
CE, UL/CUL, ROHS approval.
factory & equipments view:
Our service & FAQ
Q1. What's the trade terms you can do??
A1: We accept EXW,FOB..(Optional)
Q2. What's shipping mode can we choose?
A2: Express, Ocean and air transportation (optional).
Q3. What's the MOQ?
A3: Our MOQ is 10pcs. better price for large quantity;
Q4. What can you do if the product is broken?
A4: We promise to replace new ones to you if there is any defective happen during the warranty period.
Q5. Can i get products with my own logo??
A5: Sure, you can, MOQ is 500pcs.
Q6. Can i get a sample for testing??
A6: Sure, but sample fees should be charged on your account.
Q7. What's the mormal lead time??
A7: 7 working days for samples, 15 working days for mass production.
Q8. What's the payment conditon?
A8: All are paid before production or 30% deposit and 70% before delivery (optional)
Q9. What's the Payment do you have?
A9: We accept payment be sent via T/T, L/C, Trade Assurance, WESTERN UNION, PAYPAL.
Send your inquiry details in the bellow for professional reply,
click " send " now !
Product Categories : 0-10V Dimmable LED Driver > 0-10V Dimmable Constant Voltage LED Driver
Premium Related Products