Find LED Tube Light PCB Board, LED Tube Light PCB Assembly, LED Tube Light PCB on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)

The Latest Product Alerts Send Me

1 layer LED Based Night Lamp

Product Description

Why do LED lights have a circuit board?

Traditional lighting bulbs consume too much electricity and are not environmentally friendly. The development of science follows the development of new energy. With the use of SMT technology, LED PCBA Manufacturing is increasingly used. Aluminum 2.0W LED board and Aluminum 3.0W LED board are the most widely used in daily life. So what are the characteristics of the lights on the Aluminum LED board?
The characteristics of LED lights are more sensitive, and it also has negative temperature characteristics. It has relatively high requirements for use conditions, and devices need to be added to stabilize and protect it during use. This produces the LED driver, and the circuit board we see is the constant current driver of the LED. Some relatively inexpensive lamps (such as some spherical LED lights on the Internet and on the roadside stalls) use a RC step-down drive, but now there are not many of them. Here we take a constant current drive as an example.
The function of this circuit board:
1. Provide a stable and reliable output voltage, and can adjust the output current according to the size of the load, so as to protect the lamp from burning due to high current.
2. To prevent the damage to the LED caused by lightning and surge voltage, and the grid voltage is not always stable, constant current drive can provide protection against overvoltage and overcurrent.
3. Adjust the brightness of each lamp bead so that the overall brightness is the same.
4. LED lamp is different from the incandescent lamp that we have always used. It cannot be directly added to AC 220 voltage, and its working voltage is DC 2-3V. And this constant current drive can convert the AC220V voltage in the home Power Supply circuit into the DC DC voltage required by the LED lamps.
How to repair common failures of LED lights
1. When the switch is not turned on, the lamp flashes by itself
In daily life, you can sometimes find that when the switch is open, the lamps will flash at intervals.
Solution:
This kind of problem is generally because during the installation process, the switch of the lamp is connected to the zero line, which causes the problem of flashing without turning on the switch. The correct connection method is to connect the switch to the live wire, so that it is safer during daily maintenance.

Led Tube Light Pcb Jpg
What's the use of a small circuit board for led lamps
Correct switch connection
Another reason:
There is an electrolytic capacitor inside the constant current drive for filtering. When there is a weak current in the circuit, this capacitor can store electric charge. When it reaches a certain level, it will be released, which shows that the lamp flickers. In addition, the installation of lamps and lanterns is more complicated, and self-inducted current is generated, which will also cause it to flicker.
Led Tube Light Pcb Board Jpg
What's the use of a small circuit board for led lamps
How to distinguish the zero line of fire:
Find an electric pen, the index finger of your finger is against the cap end of the electric pen, the thumb, middle finger, and ring finger gently pinch the electric pen to keep it stable, and the tip of the electric pen touches the wire.
According to the wire color:
The color of the live wire (L) must be red, yellow, and green, the color of the neutral wire (N) must be black and blue, and the color of the ground wire (PE) must be yellow and green. Face the 3-hole socket, zero on the left, fire on the right, and ground wire in the middle.
What's the use of a small circuit board for led lamps
2. The lamps are not bright
LED lamps basically use all the lamp beads to be connected in series. According to the law of the series circuit, once a lamp bead is damaged, all the lamp beads will not emit light.
What's the use of a small circuit board for led lamps
We can observe each lamp bead on the Aluminum base board. If there is a black spot in the middle of some lamp bead, it means that the lamp bead has been damaged. If you have a multimeter in your home, you can use the multimeter to test the lamp beads one by one, which is more accurate.
Led Tube Light Pcb Assembly Jpg
What's the use of a small circuit board for led lamps
There is a black dot inside
If only individual lamp beads are damaged, we only need to short-circuit it with a wire. If there are lamp beads of this type at home (this kind of lamp beads are generally very cheap, only ten dollars Can buy a pack) can also be replaced with the same model of lamp beads. If a lot of lamp beads are damaged, it cannot be short-circuited, and a new lamp panel needs to be replaced, just buy a lamp panel of the same model.
3. All lamp beads are normal, and the driver is damaged
The probability of this happening is generally not very high, but it will happen. At this time, we only need to buy a new one according to the original driver model, and pay attention to whether the output voltage of the driver is the same as the original driver.
What's the use of a small circuit board for led lamps
Different output interfaces
At the same time, we must pay attention to another issue, that is, the type of output interface of the driver. The plugs for different lamps are generally different, and you need to purchase them according to your own lamp plug type, which is generally the one at the top left of the above picture.
Precautions
No matter which operation you perform, you need to cut off the power before proceeding. Safety first. At the same time, please pay attention when purchasing a driver. If your lamp is used in a relatively humid place, you can choose a driver with a waterproof function, which is not only safer, but also can extend the service life.


Contact us if you need more details on LED Tube Light PCB Board. We are ready to answer your questions on packaging, logistics, certification or any other aspects about LED Tube Light PCB Assembly、LED Tube Light PCB. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : 0-18Layer FR4 Board > 1 Layer LED Based Night Lamp