waterproof 12v 80 watt led dali dimming constant voltage dimmable transformer led driver
Basic Info
Model No.: SMT-024-080VM
Product Description
waterproof 12V 80 watt led dali dimming constant voltage dimmable transformer led driver
Model | SMT-012-080VM | SMT-024-080VM | SMT-036-080VM | WMT-048-080VM | |
Output | DC Voltage | 12V | 24V | 36V | 48V |
Voltage Tolerance | ±3% | ||||
Rated current | 0~6.6A | 0~3.3A | 0~2.2A | 0~1.66A | |
Rated power | 80W | 80W | 80W | 80W | |
Input | Voltage Range | 100-265VAC | |||
Frequency Range | 47~63HZ | ||||
Power Factor(Typ.) | PF>0.93/110V / PF>0.95/220V | ||||
Full Load Efficiency(Typ.) | >83% | >85% | >86% | >87% | |
AC Current(Typ.) | 0.44A/100VAC, 0.46A/220VAC | 0.44A/100VAC, 0.46A/220VAC | 0.43A/100VAC, 0.45A/220VAC | 0.43A/100VAC, 0.45A/220VAC | |
Leakage current | <0.5mA/110V , <0.7mA/220VAC | ||||
Protection | Short Circuit | Protection type: Hiccup mode, recovers automatically after fault condition is removed | |||
Over Load | <120% | ||||
Over Circuit | <1.4*I out | ||||
Over temperature | 100℃±10℃ shut down o/p voltage, re-power on to recover | ||||
Environment | Working TEMP. | -40~+60℃ | |||
Working Humidity | 20~95%RH,non-condensing | ||||
Storage TEM.,Humidity | -40~+80℃,10~95%RH | ||||
TEMP.coefficient | ±0.03%/℃(0~50℃) | ||||
Vibration | 10~500Hz,5G 12min./1 cycle,period for 72min.each along X,Y,Z axes | ||||
Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 IP67 | |||
Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC | ||||
Isolation resistance | I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH | ||||
EMC EMISSION | Compliance toEN55015,EN61000-3-2 (>50%load) | ||||
EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6 ,11,EN61547,A light industry level (surge4KV) | ||||
Others | Weight | 1.1Kg | |||
Size | 200*68*46mm(L*W*H) | ||||
packing | 329*279*176mm/10pcs/CTN | ||||
Notes | 1. All parameters NOT specially mentioned are measured at 110V, 220VAC input , rated load and 25℃of ambient temperature. 2.Tolerance:includes set us tolerance, line regulation and load regulation . 3.The Power Supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again |
- Output constant voltage
- Range 100-265VAC
- Built-in active PFC function
- Efficiency > 87% PF>0.9
- Dimming range from 0.1% to 100%
- Dimming range from 0.1% to 100%
- Protections:short circuit/over load/ over current/over temperature
- Cooling by free air convection
- IP66 design for indoor or outdoor installation .
- Dimming function:Built in DALI interface dimming function
- conform to DALI Protocol IEC62386
- Suitable for intelligent LED lighting
- Compliance to worldwide safety regulations for lighting
- Suitable for dry/damp/wet locations
- 3 years warranty
**Mechanical Specification
^^Input Rubber cable H03VV-F 3G 1.0mm²,the green/yellow cable connect with (FG) ,Brown with AC (L),Blue with AC(N)
^^Signal Rubber cable H03VV-F 2 0.75mm²,Blue is(DA1),White is(DA2)DALI Non polar!Connected to the BUS of the DALI Master.
^^Output rubber cable H03VV-F 2 1.0mm²,Red is output(V+)Positive,Black is output(V-)negative. Connected to LED Lamps.
Please make sure you connect these correctly otherwise your product will not function correctly or may be damaged.
**Dimming Operation
^^Connect the Dali signal line to the Dali bus of the Controller (the Dali Master).
After Dali Master scanning and address assignment, the driver can be successfully dimmed.
Please refer to Diagram 1
^^Notice:In the market, some DALI controllers has bus-powered functions .If not,please add an extra power supply.(DALI Power)
^^Any incorrect connecting of signal line and output line would damage the master.
**Operation Reference No.1:
**Operation Reference No.2:
**Operation Reference No.3:
**Derating Curve
^^To extend their life, please refer to the Derating Curve and derate according to the temperature.
**Instruction:
1. This driver should be installed by qualified and professional person;
2. Please make sure the transformer is installed with adequate ventilation around it to allow for heat dissipation.
3. Ensure that wiring is correct before test in order to avoid light and power supply damage;
|
What kind of LED Driver/Power Supply Smarts Electronics do??
We specialized in constant voltage & current LED Drivers , 010v/triac/DALI Dimmable LED Drivers, enclosure power suppliers, power adapters.
Smarts Electronics, the led driver manufacturer located in Quanzhou,has 6 years trade experience in Alibaba.
We have 7 kinds of led drivers or LED Power Supply :
1.Constant Voltage LED Driver;
2.Constant Current LED Driver;
3.Triac CC&CV Dimmable LED Driver
4.0-10v CC&CV Dimmable LED Driver
5.DALI CC&CV Dimmable LED Driver
6. Power adapter
All of our drivers are got UL/cUL ETL/cETL CE ROHS listed .OEM Welcome.
Our led drivers are widely used for:
1.Indoor LED illuminating lights
2.LED Neon, LED urban Decoration
3.LED Lighting Advertising,LED Display
4.Safety Protection Apparatus
5.Telecommunications, Networks
6.Vehicle Lights, Controller Panels
our market:
Our major markets are in EU & North America,it takes about 85% markets share. view transaction history
factory & equipments view:
certifications:
ETL/cETL,UL/CUL, CE,ROHS approval.
What Service we can supply??
- All inquiries will be replied within 24 hours
- Professional manufacturer,welcom to visit our website
- OEM/ODM avaliable:
A.Print logo on our product;
B. Customized specification; - After Sales-Service:
A. All products will have 100% burn-in test and strictly quality test before shipping;
B. Fast Delivery: 3-7days for samples, 15-20 days for bulk production; - High efficiency,long life span,reasonable&competetative price,fast lead time;
- We have our engineer team, if you have any question about your LED applications, let us know freely.
Frequently Asked Questions
Q1. What's the trade terms you can do??
A1: We accept EXW,FOB..(Optional)
Q2. What's shipping mode can we choose?
A2: Express, Ocean and air transportation (optional).
Q3. What's the MOQ?
A3: Our MOQ is 1pcs. better price for large quantity;
Q4. What can you do if the product is broken?
A4: We promise to replace new ones to you if there is any defective happen during the warranty period.
Q5. Can i get products with my own logo??
A5: Sure, you can, MOQ is 500pcs.
Q6. Can i get a sample for testing??
A6: Sure, but sample fees should be charged on your account.
Q7. What's the mormal lead time??
A7: 7 working days for samples, 15 working days for mass production.
Q8. What's the payment conditon?
A8: T/T in advance or 30% deposit and 70% before delivery (optional)
Q9. What's the Payment do you have?
A9: We accept payment be sent via T/T, L/C, Trade Assurance, WESTERN UNION, PAYPAL.
Q10.How to contact with me??
A9: Skype: sales5smt
***Any questions,Just feel free to click "send" to contact with me.^-^***
Product Categories : DALI Dimmable LED Driver > DALI Dimmable Constant Voltage LED Driver