12V 60w power supply adapter laptop ac/dc adaptor

1. Features:                                                                                                         

1.High efficiency,save energy ,protected environment.

2.High stability and low ripple, increase light efficiency and decrease light attenuation.

3.Meet to safety standard and EMC

4.Assure LED stability long lift and light efficiency by constant voltage.

5.Protections:Short circuit/Overload/Over temperature

6.8Hrs and 100% full load burn-in test.

2. INPUT REQUIREMENTS:

2.1 Operating range: 90-264VAC

2.2 Rated Input Voltage :100-240VAC

2.3 Input Frequency Range: 50/60Hz +/-3Hz

2.4 Input In-rush Current: 100A max

2.5 Input Current:1.5A max

3.OUTPUT REQUIREMENTS:

3.1  Output Voltage and Current

3.2   Output Voltage Regulation

   The total output voltage regulation shall be +/-5%,including the effects of line voltage variations,load current,ripple and noise,and the AC component of the load current.

3.3   Output Voltage Ripple

   The Switching Power Supply shall not exceed the following limits in the indicated voltage for 60Hz or 50Hz ripple,switching frequency ripple and noise measured with 20MHz width.

   Ripple and Noise:50/60Hz Ripple + Switching Ripple and Noise

Ripple and Noise are measured at the end of output cables which are added a

0.1uF(104) Ceramic capacitor and a 22uF Electrolytic capacitor.

4. EFFICIENCY:

   When 120VAC line input voltage (100-240 VAC),the efficiency shall be >87% at rating load.

5. DIELECTRIC STRENGTH (Hi-Pot) TEST:

   Finished product withstands with AC3000Vrms/50Hz,5mA max,

   primary to secondary, 1 minute for type test,1 second for production test.

6. INSULATION RESISTANCE:

   Primary to secondary: 10MΩ min at 500VDC. 

7. PROTECTION:

7.1   Short Circuit Protection

   If short circuit occurs,all the output should be protected. After the fault, the adapter automatically recovers.

7.2  Over Shoot

    The Output over shoot at turn-on shall not exceed 10% of normal voltage value with or without the load connected.

7.3  Start-up time

    The start-up time is less than 2 second.

8.ENVIRONMENTAL CONDITIONS:

8.1  Temperature

    Operating temperature:  0℃  to  +40℃

    Storage temperature :  -20℃ to  +60℃

8.2  Humidity

Relative humidity:≤95%

8.3  Operating Ambient Altitude

     Altitude:0-3000m

8.4  Operating at the lower temperature

      At -0℃,with the rated voltage 100-240Vac charged to the primary and unloaded and full load on the secondary 8 hours, no abnormality in electric and mechanical characteristic, after 2 hours recovery  at the room  temperature.

8.5 Operating at the high temperature

    At +40℃,with the rated voltage 100-240Vac charged to the primary and unloaded and full Load on the secondary 8 hours, no abnormality in electric and mechanical characteristic, after 2 hours recovery  at the room  temperature.

9. COOLING:

    Cooling shall be with natural convection cooling.

10.Burn-in

    The burn-in test will be performed at least 4 hours at centigrade

    degrees under full load Condition.

11.Referenced standard:

11.1  EMI Standards

Reference  EN50082-1,EN55022-B,GB-17625.1-2003, GB-9254-1998

EN55013   EN55020

11.2  Safety Standards

    The adapter shall be meet certified with the following safety standards.

    UL61347, EN61347,GB4943-2001, J55013,J55020,J60065

12.  MOUNTING CONNECTORS:

12.1  AC Input Connector

     Spec : ( EU US UK AU AR  PIN)

12.2  DC Output Cable

     Wire : (Optional) SPT-1 18AWG*2C  L=1200mm  Color: Black 

     Plug : (Optional) 5.5 x 2.1x 10mm

13.  DIAGRAM DATA:( See to attach the diagram)

  13.1. APPEARANCE DRAWING:(Unit:mm)

13.2. DIMENSION OF OUTPUT PLUG & DC CORD:(Unit:mm)

Remarks:

1)SPT-1 18AWG*2C  L=1200mm  Color: Black

2) PLUG:5.5 x 2.1 x 10mm 

Image: 

Can you help me fix my own power cords???                                                                                        

Answer:  we can help you fix / find all kinds of power cords to our drivers as per your request, for example:

MOQ: 1 PCS

Payment : T/T  Western union  Paypal  Credit Card

Delivery : 7 working days for sample order ,  13 working days for 500pcs 

Shipping term : FedEx  DHL  UPS  TNT

Why choose Quanzhou Smarts Electronic & Technology Co.,Ltd??                                                             

1).  Our major markets are in EU & North America,it takes about 85% markets share, that to say we do high quanlity power suppliers only.

2).  Most of our products are approved with ETL/CE  approval, our ETL file #5005044

3).  We give 18 month warranty

4).  We accept trial orders begining..  

5). We  have an area of 2000 square meters factory,  about 300-500 production staff...   

Website:   

certifications:                                                                                                                                                     

CE, UL/CUL, FCC,ETL, ROHS approval.

factory & equipments view:                                                                                                                            

our market                                                                                                                                                         

Our major markets are in EU & North America,it takes about 85% markets share. view transaction history

               Send your inquiry details in the bellow for professional reply, 
                                              click "    send   " now !