Find Wall-Mounted & Desktop Type Power Adapter, LED Controller, LED Controler on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)

The Latest Product Alerts Send Me

UL CE ROHS listed UK/EU/US standard wall-mount type 12v 2A power adapter

Basic Info

Model No.: SMT-012-026VP

Product Description

ULCE ROHS listed UK/EU/US standard wall-mount type 12V 2A Power adapter

Product Description

 1. Product Parameters :

 

2.INPUT REQUIREMENTS:

2.1 Operating range: 90-264VAC

2.2 Rated Input Voltage :100-240VAC

2.3 Input Frequency Range: 50/60Hz +/-3Hz

2.4 Input Current: 0.2A max

 

3.OUTPUT REQUIREMENTS:

3.1  Output Voltage and Current

 

Output

Output Regulation(V)

Harf Load

Rating Load (A)

Voltage(V)

Minimum

Maximum

Current(A)

Continuous Current(A)

12V

 11.4V

 12.6V

0A

2.0A

 

3.2   Output Voltage Regulation

   The total output voltage regulation shall be +/-5%,including the effects of line voltage variations,load current,ripple and noise,and the AC component of the load current.

 

3.3   Output Voltage Ripple

   The Switching Power Supply shall not exceed the following limits in the indicated voltage for 60Hz or 50Hz ripple,switching frequency ripple and noise measured with 20MHz width.

   Ripple and Noise:50/60Hz Ripple + Switching Ripple and Noise

 

Output

Ripple

0-2.0A

200mV

 

Ripple and Noise are measured at the end of output cables which are added a

0.1uF(104) Ceramic capacitor and a 22uF Electrolytic capacitor.

 

4. EFFICIENCY:

   When 230VAC line input voltage (100-240 VAC),the efficiency shall be >79% at rating load.

 

5. DIELECTRIC STRENGTH (Hi-Pot) TEST:

   Finished product withstands with AC 3000Vrms/50Hz,5mA max,

   primary to secondary, 1 minute for type test,1 second for production test.

 

6. INSULATION RESISTANCE:

   Primary to secondary: 10MΩ min at 500VDC. 

 

7. PROTECTION:

7.1   Short Circuit Protection

   If short circuit occurs,all the output should be protected. After the fault, the adapter automatically recovers.

 

7.2  Over Shoot

    The Output over shoot at turn-on shall not exceed 10% of normal voltage value with or without the load connected.

 

7.3  Start-up time

    The start-up time is less than 2 second.

 

8.ENVIRONMENTAL CONDITIONS:

8.1  Temperature

    Operating temperature:  0℃  to  +40℃

    Storage temperature :  -20℃ to  +60℃

 

8.2  Humidity

Relative humidity:≤95%

 

8.3  Operating Ambient Altitude

     Altitude:0-3000m

 

8.4   Operating at the lower temperature

      At -0℃,with the rated voltage 100-240Vac charged to the primary and unloaded and full load on the secondary 8 hours, no abnormality in electric and mechanical characteristic, after 2 hours recovery  at the room  temperature.

 

8.5   Operating at the high temperature

      At +40℃,with the rated voltage 100-240Vac charged to the primary and unloaded and full Load on the secondary 8 hours, no abnormality in electric and mechanical characteristic, after 2 hours recovery  at the room  temperature.

 

9. COOLING:

      Cooling shall be with natural convection cooling.

 

10.Burn-in

    The burn-in test will be performed at least 4 hours at centigrade

    degrees under full load Condition.

 

11.Referenced standard:

11.1  EMI Standards

    Reference  EN50082-1,EN55022-B,GB-17625.1-2003, GB-9254-1998

 

11.2  Safety Standards

    The adapter shall be meet certified with the following safety standards.

    UL60950-1,EN60950-1,GB4943-2001

 

12.  MOUNTING CONNECTORS:

12.1  AC Input Connector

     Spec :2Pin  (CE  UL  PLUG)

 

12.2  DC Output Cable

      Wire : (Optional)  24AWG*2C  L=1200mm Color: Black

     Plug : (Optional) 5.5 x 2.1x 10mm  Turning fork line

 

13.  MECHANICAL FEATURES:

13.1  Dimension(Size)

     Length: 59.8mm

     Width: 38.8mm

     Height: 45mm

  

13.3  Vibration and shock

      No Evidence of any mechanical or functional damage after the vibration and shock testing.

 

Test conditions

Acceptance Criteria

Frequency

10-55Hz

Nominal functional test should be satisfied after the test

Sweep

For each axis(X,Y,Z)

Displacement

0.15mm

Periodicity

10

 

14 .  DIAGRAM DATA:( See to attach the diagram)

14.1. APPEARANCE DRAWING:(Unit:mm)

 

 

14.2. NAME PLATE: (Unit:mm)

NOTE:  MATERIAL:POLYESTER COATIONG:0.10+/-0.03mm

14.3. DIMENSION OF OUTPUT PLUG & DC CORD:(Unit:mm)

Remarks:

1) UL2468  24AWG*2C  L=1200mm Color: Black 

 

2) PLUG:5.5 x 2.1 x 10mm  Turning fork line

 

Related Product
What's the series of  Power Supply do you have???                                                                            
 
Answer: We specialized in constant voltage & current LED Drivers, 010v/triac/DALI Dimmable LED Drivers, enclosure power suppliers, power adapters.

IP67 constant volatge led drivers

 

constant current led drivers

 

switching power supplies

 

triac dimmable led drivers

 

 

 

 

 

AC-DC adapter

 


 

 

 

DALI dimmable led drivers

 

 

Packaging & Shipping

what is the packing situation ??                                                        

 

MOQ: 1 PCS

Payment : T/T  Western union  Paypal  Trade  Assurance

Delivery : 7 working days for sample order ,  15 working days for 500pcs 

Shipping term : FedEx  DHL  UPS  TNT

Company Information

Why choose Quanzhou Smarts Electronic & Technology Co.,Ltd ???                                                     

 

1).  Our major markets are in EU & North America,it takes about 85% markets share,that to say we do high quanlity power suppliers only.

   

2).  Most of our products are approved with UL/CE/Rohs approval, our ULfile#E365202.

     

3).  We give 18 month warranty

    

4).  We accept trial orders begining.. 

   

5). W have an area of 2000 square meters factory,  about 300-500 production staff. ..

Website:   

     

our team:                                                                                                                                                          

              

certifications:                                                                                                                                                     

CE, UL/CUL, ROHS approval.

 

                                                    

factory & equipments view:                                                                                                                            

Our Services

Our service                                                                                                                                                        

  1. We are UL/cUL audited LED drivers/power supplies enterprise in China.
  2. Alibaba assessed 6 years Gold Supplier and more than 10 years LED industrial experience. it will guarantee your order 100% safe.
  3. Price is negotiable if you have large quantity demand.
  4. 100% QC inspection Before Shipping.
  5. Best Quality & Best Service with Competitive price.
  6. Shipping will be the most economical for you and freight cost is informed in advance for your consideration. decision for the shipping terms will be made according to your requirements.
  7. Samples will be ready within 7 working days.
  8. We have our engineer team, if you have any question about your LED applications, let us know freely,we will give you the best solution.
  9. Our trade manager is online 12 hours. and we will reply your inquiry within 8 hours.
  10. OEM design & OEM packing welcom.
  11. Samples will be ready within 7 working days.
FAQ

 

Our service & FAQ                                                               

          

Q1.    What's the trade terms you can do??
A1:    We accept EXW,FOB..(Optional)
 
Q2.    What's shipping mode can we choose?
A2:    Express, Ocean and air transportation (optional).
 
Q3.    What's the MOQ?
A3:    Our MOQ is 1pcs. better price for large quantity;
 
Q4.    What can you do if the product is broken?
A4:    We promise to replace new ones to you if there is any defective happen during the warranty period.
 
Q5.    Can i get products with my own logo?? 
A5:    Sure, you can, MOQ is 500pcs.

                          

Q6.    Can i get a sample for testing?? 
A6:    Sure, but sample fees should be charged on your account.
 
Q7.    What's the mormal lead time??
A7:    7 working days for samples, 15 working days for mass production.
 
Q8.    What's the payment conditon?
A8:    All are paid before production or 30% deposit and 70% before delivery (optional)
 
Q9.    What's the Payment do you have?
A9:    We accept payment be sent via T/T, L/C,  Trade Assurance, WESTERN UNION, PAYPAL.

 

Our goal is to provide you the right product and make you satisfied, so please don’t hesitate to contact us !

 

Product Categories : Wall-Mounted & Desktop Type Power Adapter

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters